BarChip 48 from Elasto Plastic Concrete, is a high performance structural synthetic fibre concrete reinforcement, optimised for pavements, industrial floors and precast elements.
Work with EPC and together we’ll unlock the full potential of your concrete mix.
Benefits
- Comprehensive design and technical support
- Redistributes load - increased ductility / toughness
- Eliminates corrosion - long term durability
- Eliminates set-up of steel mesh
- Improves precast production speeds up to 50%
- Increases abrasion and impact protection
- 70% reduction in carbon footprint compared to steel
- Safer and lighter to handle than steel
- Reduced wear on concrete pumps and hoses
- BarChip fibre is UV stabilised to resist solar deterioration
- Weather proof packaging on multi-stack UPVC pallets
BarChip 48 is a high performance structural synthetic fibre concrete reinforcement, optimised for pavements, industrial floors and precast elements.
Dosage
EPC BarChip 48 has a regular dosage rate of 2.5 kg to 5 kg per cubic metre. Dosage rate should be determined based on performance requirements. Regular dose rates may reduce measured slump.
Mixing
EPC BarChip 48 is added “Bags and All” to the mixer with initial batch water. Follow with dry materials and mix at high speed for the required revolutions. Alternative batching techniques can be applied.Undertake mix optimisation with EPC specialists to ensure you’re getting optimal output from your concrete mix. For more information view EPC’s batching and mixing guide.
Pumping
EPC BarChip 48 can be pumped through 50 mm rubber hoses without difficulty. Precautions should be taken to ensure the fibres can pass freely through the hopper grate.
Product for professional use only.
