Environmentally friendly concrete fibre reinforcement BarChip R65

CODE: BChip_R65
Brand: BarChip
Share:

BarChip R65 is an environmentally friendly concrete fibre reinforcement from BarChip Inc.

Made with recycled materials, BarChip R65 delivers massive carbon savings to your concrete works, without sacrificing performance.

How much carbon could you save?

 

Benefits:

  • Comprehensive design and technical support
  • Redistributes load - increased ductility/toughness
  • Eliminates corrosion - long term durability
  • Eliminates set-up of steel mesh
  • 85% reduction in carbon footprint compared to steel
  • Safer and lighter to handle than steel
  • Reduced wear on concrete pumps and hoses
  • Reduced cycle times and maintenance closure
  • BarChip fibre is UV stabilised to resist solar deterioration
  • Weatherproof packaging on multi-stack UPVC pallet

 

Dosage

BarChip R65 has a regular dosage rate of 4 kg to 6 kg per cubic metre. The dosage rate should be determined based on performance requirements. Regular dose rates may reduce measured slump

 

Mixing:

BarChip R65 is added “Bags and All” to the mixer with initial batch water. Follow with dry materials and mix at high speed for the required revolutions. Alternative batching techniques can be applied. Undertake mix design optimisation with BarChip specialists to ensure you’re getting optimal output from your shotcrete mix. For more information view BarChip’s batching and mixing guide.

 

Pumping:

BarChip R65 can be pumped through 50 mm rubber hoses without difficulty. Precautions should be taken to ensure the fibres can pass freely through the hopper grate.

EPC BarChip R65 is added “Bags and All” to the mixer with initial batch water. Follow with dry materials and mix at high speed for the required revolutions. Alternative batching techniques can be applied. Undertake mix optimisation with EPC specialists to ensure you’re getting optimal output from your concrete mix. For more information view EPC’s batching and mixing guide.  

 

Pumping

EPC BarChip R65 can be pumped through 50 mm rubber hoses without difficulty. Precautions should be taken to ensure the fibres can pass freely through the hopper grate.

 

Product for professional use only.

Brand:
BarChip
Areas of application:
  • Sprayed concrete
Fibre Class:
II (macro)
Standarts:
  • EN 14889-2
  • EN ASTM C 1116 - Type III
Tensile Strength:
610 MPa
Young’s Modulus:
10 GPa
Length:
65 mm
Base Material:
Virgin and Recycled Polypropylene
Anchorage:
Continuous Embossing
Alkali Resistance:
Excellent

Batching and Mixing (Technical_BatChing-and-Mixing_.pdf, 147 Kb) [Download]

Техническа информация (BarChip54_BG.pdf, 5,322 Kb) [Download]