The Tramex Skipper Plus non-destructive moisture meter provides a complete, safe method for detecting excess moisture in GRP and wooden boats. A pocket-sized moisture meter, the Skipper is designed to locate moisture in boat hulls and fittings.

The Skipper Plus operates on the principal of non-destructive impedance measurement. Coplanar electrodes are fitted on the base ofthe instrument from which low frequency signals are transmitted into the material being tested measuring the change in impedance caused by the presence of moisture. This reading is translated by the instrument into a moisture content reading.

The Skipper Plus Moisture Meter is used for:

• Early detection before blistering appears.
• Identifying the affected area.
• Monitoring hull during de-humidification and repairs.
•  Checking stripped or peeled areas for dryness prior to re-coating.

To achieve a lasting finish and strength of wooden boats and boat parts it is essential to ensure that they are well maintained and do not contain excess moisture. Excess moisture can rot and decay the wood itself.

Features:

• Three ranges for detecting moisture in GRP and hardwood for salt & freshwater.
• Wide range of readings for wood of 5% to 30% on hardwood scale and 0 to 100 on comparative scale for GRP and other materials
• Identifies the presence of osmosis in GRP hulls.
• Confirms if wooden boats are dry enough for painting or varnishing.
• Trace deck and bulkhead leaks.
• “Hold” function facilitates ease of recording readings
• Soft rubber electrodes make direct contact without scratching.
• High moisture audio warning tone that can be switched on or off.
• Battery operated (included)

Measuring range:

• Wood Moisture Content: 5 to 30 %
• Reference scale: 0 to 100

Operating procedure:

Moisture can cause peeling and blistering of applied finishes and treatments, newly applied finishes can fail prematurely if the wood it is applied to is not sufficiently dry. Hidden or trapped moisture can lead to mold and biological growth. The Skipper Plus can be moved across the surface of the boat to moisture survey in a fast and thorough manner, detecting moisture non-destructively through paint and coatings on wood up to a depth of 30mm (1.25”). The Skipper Plus can also be used to detect leaks and trace them to source both above and below decks.

Product for professional use only.