Waterproofing of swimming pools, tanks and pipelines

MAGIFLEX Bravo

Two-component cement-based, flexible, waterproof and breathable coating for foundations and retaining structures
Ideal for counterthrust and resistant to chemical aggression
MAGIFLEX BRAVO is a cement coating which is waterproof and breathable to water vapour, featured by high flexibility, tensile strength and adhesion to the substrate. MAGIFLEX BRAVO is easily applied with a brush or roller and allows to make waterproof coatings even under negative thrust (max 0.5 atm) on surfaces subject to hairline cracks and structures exposed to the aggression of alkali and chlorides, such as foundations, retaining walls and micro-cracked surfaces (up to 0.8 mm).
Consumption: 1,6 kg/m2 ca. per mm di spessore

DracoSeal

DRACOSEAL is a one-component, easy-to-apply cement-based waterproofing coating with osmotic action.

DRACOSEAL is suitable for waterproofing basements, tanks, pipelines, elevator shafts, swimming pools and walls.

Using the effect of osmosis, DRACOSEAL penetrates the outer layer of surfaces, forming a coating that is resistant to internal and external water pressure.

It has high adhesion.

In accordance with Decree 174: 2004, it is non-toxic and may come into contact with drinking water (Certificate of Fitness EUROFINS n. AR-13-ID-018069-01).

Consumption rate: about 1.6 kg / m² per 1 mm. thickness

DracoSeal 2

DRACOSEAL 2 is a two-component, cement-based waterproofing coating with an osmotic effect that is easy to apply.

Suitable for waterproofing basements, tanks, pipes and pipelines, elevator shafts, swimming pools and walls.

Using the effect of osmosis, it penetrates the outer layer of surfaces, forming a coating resistant to internal and external water pressure for the wall. It has high adhesion.

In accordance with Decree 21.3.73, it is non-toxic and may be in contact with foodstuffs (BIOLAB Certificate No. 95 / 938.B2).

Consumption rate: about 1.9 kg / m² per 1 mm. thickness

MAGINET

Reinforcing mesh

MAGINET is a reinforcing mesh made of glass fiber and polyester, designed for the installation of the waterproofing product MAGIFLEX or SATURNIA SYSTEM. High alkali resistance and high tensile strength.

Helps to lay the product with the required thickness. Reduces the formation of cracks from drying and movement.

Dimensions of the "mesh": 1.2 x 1.2 mm

Roll 1 x 50 m (50 m2)

LeaFIX

Waterproofing tape

Bikol LeaFix is ​​a cold-adhesive (self-adhesive) stretch tape consisting of a layer of highly elastic butyl and a reinforced back made of non-woven fabric. The non-woven layer allows the tape to adapt to the contours of the surface. Tile adhesive or waterproofing can be applied to the tape. The adhesive side is covered with a protective, easily removable foil.

Ideal for waterproofing: Terraces, Wet rooms, Bathrooms, Pools, Changing rooms, Around siphons, Repair cracks in concrete

Roll 15 meters long and 80mm wide

EPOWALL

Chemical-resistant epoxy coating
EPOWALL is a two-component solvent-free epoxy resin that is used to make coatings which are chemical-resistant to alkali, acids and to the flow of liquids, even with solid suspensions. EPOWALL exhibits high adhesion to the substrate, ideal to coat basins, walls, water and drainage treatment plants.
Consumption: 150 ÷ 250 g/m2 per coat
400 ÷ 500 g/m2 (recommended minimum)