Low viscous, 3-component acrylate gel RUBBERTITE

Brand: TPH

RUBBERTITE is especially noted for its extremely low blending viscosity that is almost equivalent to the viscosity of water.

  • Very low viscous acrylate gel with high flexibility
  • Very good penetration, even in water-filled cracks
  • Especially useful for massive elements
  • Long term stable. Proven stability of at least 19 years.
  • Groundwater friendly approved
  • German general building authority test certificate in combination with POLINIT
learn more
Информация:

Този продукт се предлага по запитване. За повече информация, моля попълнете нашата форма.

Contact us for a price
Share:

RUBBERTITE is a three-component, water-expanding hydrogel on an acrylate or methacrylate basis that hardens to a rubber-like, flexible product.

RUBBERTITE is especially noted for its extremely low blending viscosity that is almost equivalent to the viscosity of water. This renders a series of renovation procedures possible that cannot be accomplished with injection materials of higher viscosity.

RUBBERTITE can be applied in the case of grout curtains, brickwork injection, horizontal barriers and ground stabilisation.

RUBBERTITE combined with POLINIT is suitable for filling cracks in concrete structures and for injection hose grouting  (for further information see  Technical Data Sheet POLINIT).

In cured state RUBBERTITE  has a good chemical resistance against many acids, bases, solvents and fuels etc. due to its high-quality material basis (see chemical resistance list). During reaction and in cured state RUBBERTITE emits no toxic substances into the groundwater. Product elements that are not built-in during the reaction process  (monomers,  intermediates) are rapidly and completely biodegra-dable.

RUBBERTITE has a  German  General  Building  Inspectorate Approval as an injection product for curtain grouting. RUBBERTITE in combination with POLINIT has a DIBt-certificate for use as a crack filler within the framework of the German Reinforced Concrete Committee (DAfStb) in the guideline for protection and repair of concrete components (Guideline for protection and repair of concrete structures).

RUBBERTITE alone and combined with POLINIT is CE marked according to EN 1504-5, System 2+ as a concrete injection product for swelling fitted filling of cracks.

 

STRENGTHS

  • Very low viscous acrylate gel with high flexibility
  • Very good penetration, even in water-filled cracks
  • Especially useful for massive elements
  • Long term stable. Proven stability of at least 19 years.
  • Groundwater friendly approved
  • German general building authority test certificate in combination with POLINIT

PACKAGING

  • Component AI - 20 kg-plastic canister;
  • Component AII - 1 kg-plastic bottle;
  • Component BII - 0,3 kg-plastic can;
Brand:
TPH
Standarts:
  • EN 1504-5
Components:
Three-component
Color:
  • white
  • colourless
Packaging:
Component AI - 20 kg-plastic canister; Component AII - 1 kg-plastic bottle; Component BII - 0,3 kg-plastic can;
Injection material:
  • Acrylate gel
Injection technology :
  • Injection of grouting hoses
  • Crack injection
  • Curtain injection
  • Solidifying of soil
  • Injection into masonry
Pot-life:
approx. 5 мин.
Final curing:
approx. 10 мин.

Техническа информация (TDS_Rubbertite_BG.pdf, 721 Kb) [Download]