LOAD CAPACITY:
125 kN test load EN 124.
MATERIAL:
Frame and cover sections in extruded aluminium. Stainless steel screws.
FEATURES:
Sealed access cover in high-quality finish. Very attractive surface, the visible edges are particularly attractive. Therefore these covers are particularly suitable where a look of elegance is required. Very easy-to-open design. Robust corner joints guarantee a very high degree of rigidity and make it easier to lay tiles and ceramic finishes. EPDM seal. The cover is reinforced with a clamped steel mesh reinforcement.
THE LIFT-OFF OPENING SYSTEM:
Every HAGODECK Type BVA alu cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key.
APPLICATIONS:
Inside buildings where it is important to obtain a nice visual effect. Also, in places where floor finishes may need polishing after fixing or where particular attention needs to be given to corrosion resistance.
INSTALLATION:
Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring and to fill the cover with water-tight concrete.
Types & Dimensions:
Cover depth ≈ 6.6 cm
Installation height ≈ 7.6 cm
Type |
Clear S/O* dimensions of shaft
|
Outside dimensions
|
Weight
|
|---|---|---|---|
| c x d | A x B | ||
| BVА 22 | 20 x 20 | 32 x 32 | 3 kg |
| BVA 33 | 30 x 30 | 42 x 42 | 5 kg |
| BVA 44 | 40 x 40 | 52 x 52 | 7 kg |
| BVA 45 | 45 x 45 | 57 x 57 | 8 kg |
| BVA 55 | 50 x 50 | 62 x 62 | 9 kg |
| BVA 64 | 60 x 40 | 72 x 52 | 9 kg |
| BVA 66 | 60 x 60 | 72 x 72 | 10 kg |
| BVA 635 | 63,5 x 63,5 | 75,5 x 75,5 | 11 kg |
| BVA 77 | 70 x 70 | 82 x 82 | 12 kg |
| BVA 86 | 80 x 60 | 92 x 72 | 12 kg |
| BVA 88 | 80 x 80 | 92 x 92 | 15 kg |
| BVA 106 | 100 x 60 | 112 x 72 | 15 kg |
| BVA 108 | 100 x 80 | 112 x 92 | 21 kg |
| BVA 110 | 100 x 100 | 112 x 112 | 23 kg |
| 1. Frame | 4. Reinforcement | 7. Base plate |
| 2. Cover | 5. Allen screw | 8. Injection-moulded part (plastic) |
| 3. Seal | 6. Plastic cap | 9. Square boss |
Product for professional use only.
