Load capacity:
15 kN test load EN 124.
Material:
Frame and cover sections in extruded aluminium. Stainless steel screws.
Features:
Odour and waterproof access cover in high-quality finish. Only 5 cm installation depth. Particularly suitable for situations where greater installation depths are not possible. The shallow trough results in a weight reduction when filled - so less effort is required to lift the cover. An unrestricted height of 14 mm is available for laying slabs, tiles or parquet flooring etc. Two chemical-resistant special seals. The cover is reinforced with a clamped steel mesh reinforcement.
The Lift-Off opening system:
Every HAGODECK Type BVA-SL slim Alu comes with a set of lifting keys and precise installation instructions. The HAGO advantage: Jammed covers are lifted by simply turning in the golden lifting key.
Recommended applications:
For indoor access shafts, for which a pleasant appearance is required. Also, in places where floor finishes may require grinding or where particular attention must be paid to corrosion resistance.
Installation:
Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring and to fill the cover with water-tight concrete.
Types & Dimensions:
Type |
Clear dimen. of shaft
|
Weight empty
|
Weight
|
|---|---|---|---|
| c x d | A x B | ||
| BVA-SL slim 22 | 20 x 20 | 29 x 29 | 2 kg |
| BVA-SL slim 33 | 30 x 30 | 39 x 39 | 3 kg |
| BVA-SL slim 44 | 40 x 40 | 49 x 49 | 4 kg |
| BVA-SL slim 45 | 45 x 45 | 54 x 54 | 5 kg |
| BVA-SL slim 55 | 50 x 50 | 59 x 59 | 6 kg |
| BVA-SL slim 64 | 60 x 40 | 69 x 49 | 6 kg |
| BVA-SL slim 66 | 60 x 60 | 69 x 69 | 7 kg |
| BVA-SL slim 635 | 63,5 x 63,5 | 72,5 x 72,5 | 8 kg |
| BVA-SL slim 77 | 70 x 70 | 79 x 79 | 9 kg |
| BVA-SL slim 86 | 80 x 60 | 89 x 69 | 9 kg |
| BVA-SL slim 88 | 80 x 80 | 89 x 89 | 10 kg |
| BVA-SL slim 106 | 100 x 60 | 109 x 69 | 10 kg |
| BVA-SL slim 108 | 100 x 80 | 109 x 89 | 12 kg |
| BVA-SL slim110 | 100 x 100 | 109 x 109 | 14 kg |
| 1. Frame | 4. Bottom seal | 7. Cover plate (aluminium) |
| 2. Cover | 5. Allen screw (stainless steel) | 8. Reinforcement |
| 3. Top seal | 6. Plastic cap |
9. Nut (stainless steel) 10. Casting (aluminium) |
Product for professional use only.
