Structural epoxy EPOX RIPRESA

Brand: Draco

Two-component, pourable structural epoxy, ideal for:

  • Construction joints on screeds and concrete.
  • Repairing cracks in concrete flooring and civil sub-bases.
  • Primer for anchoring with special grouts
learn more
Share:

EPOX RIPRESA is a two-component structural adhesive based on epoxy resins in the aqueous phase. It is suitable for creating construction joints between fresh and cured concrete as well as bonding and monolithic repairs by casting. EPOX RIPRESA provides structural bonding even where there is dampness.

EPOX RIPRESA отговаря на БДС стандарт 

 

STRENGTHS

  • It shows high adhesion to all support surfaces.
  • It shows higher mechanical strength than reinforced concrete.
  • It is very resistant to water, salt, acid and alkali solutions.
  • It can be used for cold joints exposed to damp and water.

 

IT IS IDEAL FOR

  • Construction joints on screeds and concrete.
  • Repairing cracks in concrete flooring and civil sub-bases.
  • Primer for anchoring with special grouts

 

QUANTITY USED

  • approx. 1.1 kg/m2 per mm of thickness
  • Construction joints 400 to 800 g/m2 depending on the substrate
  • primer 150 to 500 g/m2 depending on the porosity of the substrate

 

PACKAGING

  • 1 kg Pail + 0.3 kg Pail = (A + B) 1.3 kg
  • 5 kg Pail + 1.5 kg Pail = (A + B) 6.5 kg
  • 10 kg Pail + 3 kg Pail = (A + B) 13 kg

 

Product for professional use only.

Brand:
Draco
Areas of application:
  • Industrial floors
  • Concrete surfaces
  • Residential flooring
Standarts:
  • EN 1504-4
Quantity used:
approx. 1.1 kg/m2 per mm of thickness
Packaging:
1 kg Pail + 0.3 kg Pail = (A + B) 1.3 kg; 5 kg Pail + 1.5 kg Pail = (A + B) 6.5 kg; 10 kg Pail + 3 kg Pail = (A + B) 13 kg

Техническа информация (EPOX_RIPRESA_17_BG.pdf, 1,122 Kb) [Download]

Ремонт и усилване на бетон (брошура) (Sistemi-za-remont---Draco.pdf, 2,644 Kb) [Download]