Antiscivolo System is a single-component product designed for treating smooth floor surfaces by significantly increasing surface grip when in contact with water.

It works directly on the surface, creating a microscopic, invisible texture that enhances the coefficient of friction. This helps reduce the risk of slipping without changing the appearance of the flooring.

The product is suitable for both professional and residential use. This kit also includes a cleaning solution, essential for proper surface preparation before application.

Key Benefits:

✔️ Single-component product – easy to use
✔️ Transparent treatment – does not alter surface appearance
✔️ Increases grip and safety in wet conditions
✔️ Suitable for indoor and outdoor use
✔️ Complete kit for treating up to 10 m² of flooring

The Kit Includes:

• 1 liter of cleaning solution (ANTISCIVOLO CLEANER)
• 1 liter of anti-slip treatment (ANTISCIVOLO SYSTEM)
• 1 manual pad holder
• 2 blue synthetic scrubbing pads

Coverage: up to 10 m² (depending on the porosity and structure of the surface)

Ideal for use in:

• Private homes
• Common areas in residential buildings
• Office spaces
• Entryways, stairs, and hallways
• Ramps and sloped surfaces
• Storage and service areas
• Kitchens and cafeterias
• Gyms and locker rooms

Suitable for:

• Ceramic tiles
• Porcelain tiles
• Clinker
• Natural stones
• Polished stone surfaces
• Concrete and other mineral-based floors

⚠️ Not suitable for: wooden, laminate, plastic, or painted surfaces.

Application Instructions:

1. Cleaning:
Clean the surface thoroughly. Make sure it is dry and free of dust, grease, or product residues.

2. Diluting CLEANER:
Dilute the cleaning solution with water (2–10%), depending on the degree of dirt.

3. Applying CLEANER:
Use the blue scrubbing pad to apply and scrub the cleaning solution onto the surface.

4. Rinsing:
Rinse thoroughly with water and allow the surface to dry completely.

5. Applying Antiscivolo System:
Apply the anti-slip treatment to the dry, clean surface and scrub with a clean blue pad.

6. Treatment time:
Work the product into the surface for 20–30 minutes, adding more product if needed.

7. Final rinse:
Rinse thoroughly with plenty of water and dry the surface.

8. Repeat if necessary:
If higher grip is required, the application can be repeated.

Certified Safety

Antiscivolo System has been tested by independent laboratories and complies with the UNI EN 13036-4 standard for surface friction. It is certified for improving safety on smooth and wet floor surfaces.
 

Coverage:

1 kit = up to 10 m² (may vary depending on the floor type)

Storage:

Store in a cool, dry place. Protect from frost and direct sunlight.