SiloTreat® Stone S + is a depth impregnator, part of the system for complete protection of natural stone materials.
SiloTreat® Stone S + ensure deep penetration of the active ingredient.
The product is resistant to alkaline environments and is not affected by climatic conditions.
SiloTreat® Stone S + creates vapour-permeable and colourless impregnation that does not change the appearance of the treated stone surface.
The deep impregnator significantly reduces the absorption of water and soluble salts.
SiloTreat® Stone S + increases the resistance of the stone surface, subjected to long cycles of freezing and thawing.
For best results, it is recommended that the SiloTreat® Stone S + deep impregnator be used before applying SiloTreat® Stone BE as a system for the complete protection of natural stone materials.
Areas of application:
- Facade cladding of natural stone
- Exterior flooring of natural stone (pavements, verandas, terraces, stairs, squares)
- Historical monuments
Application method:
- SiloTreat® Stone S + is applied using airless spray guns (HVLP).
- Apply the impregnator without interruption in successive horizontal lines from bottom to top, without repeating.
- The product must be protected for at least 4 hours before coming into contact with liquids.
- SiloTreat® Stone S + should not be applied with a brush.
Indicative Consumption*:
- Porous natural stone - 150 -200 ml / m2 *
* Average consumption rate - the indicated quantities are indicative, as the consumption rate for each specific application depends on the absorption capacity of the surface.
Package:
- spray bottle - 250 ml., 500 ml., 1 litre.
- tube - 5 litres, 10 litres, 20 litres.
Product for professional use only.
