SiloTreat^® Stone BE is created for hydrophobic impregnation and self-cleaning effect of natural stone materials (limestone, marble, sandstone, granite, tuff, gabbro, breccia and others).

SiloTreat^® Stone BE imparts hydrophobic and oleophobic properties to surfaces, preventing the penetration of water, and dirt, stopping the initial form of erosion, prevents the development of mould and moss. The surface water repellent retains the "breathable" ability of the treated material without changing its colour and appearance.

For complete protection of porous natural stone materials, use in combination with the SiloTreat^® Stone S + deep water repellent.

Areas of application:

• Facade cladding of natural stone
• Polished interior surfaces of natural stone (floors, walls, kitchen and bar countertops, countertops in public places, bathroom cladding)
• Exterior flooring of natural stone (pavements, verandas, terraces, stairs, squares)
• Historical monuments

Application method:

Impregnation of porous stones:

• SiloTreat^® Stone BE is applied using airless spray guns (HVLP).
• Apply the product without interruption in consecutive horizontal lines from bottom to top without repeating.
• Remove the glass drops as quickly as possible with a paintbrush.
• The product must be protected for at least 4 hours before coming into contact with liquids.
• The hydrophobic effect appears up to 4 hours after surface treatment.

Impregnation of polished stones:

• Evenly apply a thin layer of SiloTreat® Stone BE on the polished stone (marble, granite, quartz, technical stone, etc.).
• Wait about 30 seconds, then use a paper towel to polish the entire surface quickly and evenly.
• After polishing, any traces of the product are completely removed by re-polishing with a new, clean paper towel.
• The product must be protected for at least 60 minutes before coming into contact with liquids.

Indicative Consumption*:

• Porous natural stone - 50 - 100 ml / m2 *
• Polished natural stone - 30 - 50 ml / m2 *

* Average consumption rate - the indicated quantities are indicative, as the consumption rate for each specific application depends on the absorption capacity of the surface.

Package:

• spray bottle - 250 ml., 500 ml., 1 litre.
• tube - 5 litres, 10 litres, 20 litres.

Product for professional use only.