SiloTreat® Concrete BE is hydrophobic impregnation for concrete surfaces. The product protects the concrete structures from the penetration of water and salts and other aggressive chemicals contained in it.
Concrete surfaces stay clean longer, do not form ugly dark streaks and are less susceptible to the development of microorganisms, mould and algae.
For longer-term protection, use in combination with the SiloTreat® Concrete DH.
The waiting time between the application of SiloTreat® Concrete DH and the SiloTreat® Concrete BE surface water repellent must be at least 2 weeks.
Areas of application:
- Visible / architectural concrete
- Facade fibre-cement panels
- Concrete flooring
- Concrete parking lots
- Bridge constructions
- Port facilities
- Tunnels and subways
- Concrete panels
- Reinforced concrete overpasses for pipelines
- Hydraulic equipment, etc.
Application method:
- SiloTreat® Concrete BE is applied using airless spray guns (HVLP).
- Apply the product without interruption in consecutive horizontal lines from bottom to top without repeating.
- Remove the droplets as quickly as possible with a brush.
- The product must be protected for at least 4 hours before coming into contact with liquids.
- The hydrophobic effect appears up to 4 hours after surface treatment.
Indicative Consumption*:
- Concrete - 100 - 180 ml / m2 *
* Average consumption rate - the indicated quantities are indicative, as the consumption rate for each specific application depends on the absorption capacity of the surface.
Package:
- spray bottle - 1 litre.
Product for professional use only.
