FLUECO 80 T FIBER is a single component, fibre-reinforced cementitious pre-mix mortar with polymeric fibres with a microstructural, reinforcing action.
The stainless steel fibres are inorganic, alkali resistant and flexible.
The mortar is combined with water to obtain a thixotropic mix that is shrinkage-compensated in air.
FLUECO 80 T FIBER develops high initial and final mechanical strength and is waterproof and impermeable to carbon dioxide. It is long-lasting even in highly aggressive environments and ensures strong bonding. It contains no metal parts or chlorides.
FLUECO 80 T FIBER is resistant to chemical and environmental attacks and is suitable for all the classes of exposure envisaged by UNI 11104.
STRENGTHS:
The characteristics of FLUECO 80 T FIBER make it suitable for structural repairs of concrete buildings subject to high physical, chemical and environmental attacks. FLUECO 80 T FIBER can also be applied by spraying without requiring any electro-welded mesh. The specific characteristics of the product are:
- RESISTANCE TO SULPHATES AND CHEMICAL AND ENVIRONMENTAL ATTACKS: FLUECO 80 T FIBER has high compactness, low capillary porosity and high resistance to aggressive agents present in the environment such as chlorides and sulphates.
- IMPERMEABLE TO WATER AND CARBON DIOXIDE: thanks to the chemical and physical characteristics of its components FLUECO 80 T FIBER is totally waterproof, resistant to freeze-thaw cycles and is not subject to carbonatation.
- CAN BE APPLIED WITHOUT ELECTRO-WELDED MESH: The specific formulation of FLUECO 80 T FIBER, together with its flexible inorganic fibres remove the necessity for the installation of electro-welded mesh, thus facilitating installation.
- ABSENCE OF CRAZING AND CRACKS CAUSED BY PLASTIC SHRINKAGE: FLUECO 80 T FIBER has no crazing or plastic shrinkage cracks thanks to the use of special synthetic fibres that impede cracking.
- CONTRASTED EXPANSION DURING AIR CURING: used together with the curing additive PRESIDIO SRA it permits the development of expansive properties even when cured in the open air.
- HIGH ADHESION TO THE SUBSTRATE: the specific formulation of FLUECO 80 T FIBER has been specifically formulated to ensure increase adhesion between mortar and substrate, thus facilitating instalment.
IT IS IDEAL FOR:
FLUECO 80 T FIBER should be used for the structural repair, maintenance and restoration of damaged concrete and reinforced concrete structures exposed to aggressive environments. FLUECO 80 T FIBER is particularly suitable for:
- Structural repair of columns, beams, slabs and walls in reinforced concrete and pre-cast elements exposed to high sulphate attack.
- Repair and build-up of concrete in layers up to 5 cm thick.
- Hydraulic works, infrastructures, viaducts and tunnels, even where there is contact with seawater.
- Repair of the cortical layer of concrete and repair of missing rebar cover due to the oxidization of the rebars
QUANTITY USED:
- 19 kg/m2 approx. per cm of thickness
PACKAGING:
- 25 kg Bag
Product for professional use only.
