CONCRETE FINISHER is a ready-mixed cement mortar based on specific fine-grained aggregates, synthetic polymers and special admixtures. It should be mixed with water.
CONCRETE FINISHER is very thick and exhibits superior resistance to frost and thaw as well as chemically aggressive agents. Due to its superior adhesion and low permeability to carbon dioxide and water, CONCRETE FINISHER is particularly recommended for protective skim coatings on concrete structures and finish coat with FLUECO mortars.
STRENGTHS:
- It is easy to mix and lay.
- It is very compact and it shows low porosity.
- It is very resistant to frost and thaw, sulphates and lubricant oils.
- It shows high mechanical strength.
IT IS IDEAL FOR:
- Skim coat restoration with a thickness between 1 to 4 mm.
- Anti-carbonation finishing coat for restoring reinforced concrete buildings.
- Structures exposed to smog and environmentally aggressive agents (eaves, docking berths, basins, etc.).
QUANTITY USED:
- 1.8 kg/m2 per mm of thickness
PACKAGING:
25 kg Bag
Product for professional use only.
