SiloTreat Agraff

CODE: silo_agraff_1l
Brand: SiloTreat

Graffiti protection for:

  • Concrete
  • Brick/clinker
  • Sandstone (not Udelfanger sandstone)
  • Sand limestone
  • Mineral-based stucco (with limits)
  • Marble and granite
learn more
Информация:

Този продукт се предлага по запитване. За повече информация, моля попълнете нашата форма.

Contact us for a price
Share:

SiloTreat® Agraff is a water-repellent and permanent oil and water-soluble graffiti protection for mineral building materials.

The product penetrates deep into the base and makes it hydro and oleophobic.

It contains practically no volatile organic compounds.

SiloTreat® Agraff provides waterproof protection that is vapour permeable at the same time.


Areas of application:

  • Concrete
  • Brick/clinker
  • Sandstone (not Udelfanger sandstone)
  • Sand limestone
  • Mineral-based stucco (with limits)
  • Marble and granite


Application method:

  • SiloTreat® Agraff is applied using High Volume Low Pressure (HVLP) spray guns (at low operating pressure, not more than 0.7 bar / 10 psi with nozzle sizes from 1.3 to 1.5 mm.).
  • Apply the product without interruption in consecutive horizontal lines from bottom to top without repeating.
  • Large drops should be removed as soon as possible with a brush.
  • The product must be protected for at least 4 hours before coming into contact with liquids.
  • In order to obtain longer-lasting protection against graffiti, it is recommended to apply an additional layer of the product. The surface must dry completely between each step.
  • The amount of product required for the application of each subsequent hand is significantly less.

 

Indicative Consumption*:

  • Mineral building materials - 30 - 150 ml / m2 *

* Average consumption rate - the indicated quantities are indicative, as the consumption rate for each specific application depends on the absorption capacity of the surface.

 

Package:

  • spray bottle - 1 litre.
  • tube - 5 litres, 20 litres.

 

Product for professional use only.

Brand:
SiloTreat
Water repellent impregnation for:
  • Natural Stone
  • Concrete
  • Plaster
Ideal for:
  • Surface protection
Quantity used:
30 - 150 ml./.m2